Partix Auto
Partix Auto
Engineered to OEM standard tolerances for global passenger and commercial vehicle chassis platforms
Under the demands of modern emission regulations, optimization of volumetric efficiency via engineered intake paths is critical for OEMs and global aftermarket distributors alike.
Engine performance relies heavily on dense, oxygen-rich ambient air. Modern air intake systems are designed to isolate high thermal radiation under the hood, ensuring low charge temperature and optimizing fuel combustion metrics.
Managing acoustics in the intake tract is a cornerstone of passenger comfort. Incorporating Helmholtz resonators and specialized expansion chambers helps neutralize low-frequency resonance and whistling noises.
Utilizing high-grade polypropylene, EPDM rubbers, and glass-fiber reinforced polyamides ensures that air ducts, hoses, and cleaner housings resist constant under-hood vibrations and aggressive temperature cycling.
Bridging state-of-the-art polymer engineering with high-capacity automotive parts manufacturing for global supply chains.
Shenzhen Partix Auto Co., Ltd. sits in Zhucheng, Shandong. This spot lies close to Weifang, known as the kite capital. Moreover, it falls within the one-hour circle around Qingdao. As a result, transportation stays easy and quick. The strategic geographical location allows seamless logistics and fast export operations via Qingdao Port, servicing partners globally in record turnaround times.
People founded Partix Auto back in 2004. Today, others see it as a national high-tech company. It also counts as a state-owned holding listed firm. The team pushes hard on new ideas. Because of that, Partix Auto won the title of “National Intellectual Property Demonstration Enterprise.” And since 2006, experts have regularly named it among the “National Top 100 Automotive Parts Suppliers.”
Partix Auto leads strongly in China’s automotive parts field. The company mainly designs and builds top-grade fluid pipelines. It also makes car suspension systems and produces rubber parts that reduce vibration. In general, its main products include bushings, air spring products, engine mounts, fluid line system products, thrust rods, and car suspension systems. These items are widely used in passenger cars, commercial vehicles, and engineering machinery.
By delivering integrated system solutions, the company meets the evolving demands of global automotive partners. Partix Auto continues to drive innovation in the automotive industry, turning advanced ideas into practical solutions for the future. From raw material compound blending to structural dynamic testing, the company maintains absolute command over production quality.
As exhaust and environmental regulations intensify globally, vehicle intake architectures undergo strict engineering revisions.
The global automotive market is demanding higher thermal efficiency from both traditional Internal Combustion Engines (ICE) and hybrid powertrains (HEVs/PHEVs). This shift requires air intake assemblies to minimize airflow restriction (pressure drop) while simultaneously capturing microscopic dust particles. High-frequency turbocharging introduces additional load requirements. Intercooler hoses and intake boots must endure dynamic pressures up to 3.0 bar and temperatures exceeding 180°C.
Our focus on EPDM hose formulation, reinforced plastic buffers, and precision-molded components positions us to support international distributors sourcing components that pass stringent testing criteria like ASTM D2000 and SAE J200. Whether providing lightweight composite ducts or specialized oil mist separator hoses, we ensure high material reliability.
| Material Type | Common Applications | Temperature Range | Primary Technical Advantage |
|---|---|---|---|
| Custom EPDM Hoses | Radiator cooling, Turbocharged bypass, air intake paths | -40°C to +150°C | Excellent ozone resistance, high tensile strength, electrochemical degradation resistance |
| PA66-GF30 (Polyamide) | Intake Manifolds, clean-side ducts, air cleaner boxes | -45°C to +160°C | High stiffness, dimensional stability under high vacuum loads |
| Engineered VMQ (Silicon) | High-pressure turbocharger charge air hoses | -50°C to +220°C | Extreme temperature thresholds, high flexibility under continuous load cycles |
| Advanced NBR/PVC | Crankcase ventilation (PCV) hoses, fuel vapor recovery | -35°C to +125°C | Superior resistance to hydrocarbon permeation and engine oil mists |
Adapting vehicle air intake architectures to withstand unique global climates and operational terrains.
Dust and fine particulate matter pose serious erosion risks to cylinders. Our intake solutions for arid regions incorporate multi-stage pre-cleaners and high-efficiency filtration barriers, shielding critical engine blocks from micro-abrasive wear.
In sub-zero conditions, intake materials can easily become brittle. Our customized EPDM formulations remain flexible even at -40°C, ensuring intake boots do not crack under severe engine roll and torsional vibrations.
High relative humidity paired with salt spray accelerates surface oxidation. We leverage non-corrosive synthetic polymers and marine-grade stainless-steel securing brackets, preventing structural degradation in coastal regions.
Off-road machinery relies on massive air supply volumes. We engineer heavy-duty clean-side air ducts that resist collapse under extreme vacuums, ensuring maximum power output remains steady.
Our R&D roadmap focuses on integration, weight reduction, and acoustic optimization.
Embedding high-precision Mass Air Flow (MAF) and Intake Air Temperature (IAT) sensor adapters directly into blow-molded ducts reduces connection points and minimizes potential leak zones.
By shifting to bio-based polyamides and highly recyclable PP compounds, we aim to reduce the carbon footprint of our intake products without sacrificing mechanical performance.
Using advanced 3D sound field analysis, our next-generation resonator housings adaptively mute disruptive frequencies, maintaining refined cabin acoustics across different engine loads.
How our plant's location helps us maintain consistent supply line continuity for international buyers.
Our facility in Zhucheng, Shandong, sits inside an established automotive manufacturing cluster. This gives us direct access to high-grade polymer producers, curing agents, and mold makers. Operating within a one-hour transit circle to Qingdao Port enables us to coordinate shipping schedules efficiently. This reduces warehousing overheads and ensures stable lead times.
With fully integrated vertical production lines—encompassing mold tool fabrication, rubber extrusion, and assembly operations—we protect our clients from common delays associated with multi-tier supplier reliance.
Long-term procurement agreements with leading elastomer suppliers guarantee material consistency and stable pricing, even during volatile global market fluctuations.
Our automated extrusion and compression-molding equipment ensures highly consistent dimensional accuracy, minimizing human error and maximizing output rates.
Our experienced export documentation team ensures fast compliance clearances, avoiding delays at ports of entry.
Every shipment undergoes rigorous technical inspections to ensure it matches global automotive standards.
We align our production with global OEM quality management standards to ensure process repeatability.
Our in-house labs test for rubber ozone resistance, ultimate tensile strength, and high-frequency vibrations.
Our components are fully compliant with RoHS and REACH regulations, protecting against hazardous chemicals.
Coordinate Measuring Machines verify complex geometries, ensuring seamless alignment during assembly.
Direct answers regarding materials, manufacturing capabilities, and order processes.
Precision-engineered engine mounts, hydraulic steering hoses, and commercial air springs
